Is there a fixed point mounting kit for the LDO Model 2 or the Differential pH (pHD) sensors?

Dokument-ID

Dokument-ID TE4269

Veröffentlichungsdatum

Veröffentlichungsdatum 06.06.2019
Frage
Is there a fixed point mounting kit for the LDO Model 2 or the Differential pH (pHD) sensors?
Zusammenfassung
Part configuration and options for fixed point mounting hardware for both the LDO Model 2 sensor and the pHD sensors.
Antwort
Please see below information for fixed point mounting installation (Product # LZY370):
 
 

 
 
NOTE - The following part numbers have been changed:
 
  • LDO pole with adapter: Product # 579-095EUNF is the pole with the adapter {Product # 8813400 } included.
     
  • pHD pole and adapter: Product # 1000F3407-00882  is the pole. Product # 3P2120-132 is the adapter (reducing coupler 11/2"-1") for the pHD, and Product # 1P2116-107 is the end cap. Product # 1H1203 is the grommet.
 
However there is an alternative mounting bracket. It is used with the Evita product line and you could use it with all of the parts listed above. Product # 085G4085 is a wall mount bracket. There is one drawback, it does not stick out from the wall and has a limited tilt (see below). You would have to either place it at the top of the wall for maximum tilt or slide the pole all the way down for maximum tilt. Customer has a choice on what is best for their situation.

Hat dir diese Antwort geholfen?

Wird gesendet...
Vielen Dank für Ihr Feedback.
Beim Senden ist ein Fehler aufgetreten. Versuchen Sie es erneut.