What are the instructions for sending curve data from an AT1000 to Tech Support?


Dokument-ID TE6847


Veröffentlichungsdatum 04.01.2022
What are the instructions for sending curve data from an AT1000 to Tech Support?
Instructions for sending curve data from an AT1000 to tech support.
To get help with issues with an AT1000, please utilize the ask a question feature on the Support Homepage if the answer is not available using the search function on this same page. To aid in troubleshooting,Tech Support will sometimes request that the customer send them curve data from their instrument. Below are the instructions for doing this.

1)  The last three titration files can be transferred to a USB drive that is plugged into the side of the titrator (any USB drive should work, including the one that came with the application files in the application kit).  Plug the USB drive into the side of the instrument, then run 2 or 3 more samples.  Data from the titrations will be automatically sent to the USB drive.   (Note, these do not need to be run them all at once; one test could be performed today, one tomorrow, etc.)

2)  Once the titrations have been completed, export the results data log to the USB drive. Before unplugging the USB drive from the titrator, go to the "Data Log" screen, and select the "Export data log" option. Make sure the "result type" is set to "Sample Analysis" (all other options can be left to "all"); then press the "preview" button. This should bring up a table of titration results. Press the "export" button to send this data to the USB drive. 

Once the files have been downloaded to the USB drive, you can take the USB drive to a computer. The drive includes a "HACH" folder on the USB drive. The easiest way to send all the data, is to right click on the “HACH” folder and then “Send to” >> “Compressed (zipped) folder”, which will create a single zipped file that can be attached to the email reply to Tech Support.

Hat dir diese Antwort geholfen?

Wird gesendet...
Vielen Dank für Ihr Feedback.
Beim Senden ist ein Fehler aufgetreten. Versuchen Sie es erneut.