What is causing the TitraLab® AT1000 Series Potentiometric Titrator results to be double what they normally are?

Dokument-ID

Dokument-ID TE7177

Veröffentlichungsdatum

Veröffentlichungsdatum 10.04.2018
Frage
What is causing the TitraLab® AT1000 Series Potentiometric Titrator results to be double what they normally are?
Zusammenfassung
AT1000 results are double from what is expected
Antwort
The most common cause of results doubled on the TitraLab® AT1000 Series Potentiometric Titrator is the syringe volume input into the titrator is incorrect. The titrator defaults to a 10 mL syringe, but there are applications, such as the Total/Free Chlorine and Chlorine Dioxide applications, that require a 5 mL syringe. If this setting isn't changed in the titrator programming, the results will come out double to what is expected. To change the syringe volume, perform the following steps:
  1. From the Main Menu, select "Maintenance"
  2. Select "Syringe Management"
  3. Select "Syringe Volume Change"
  4. Select the appropriate syringe volume
  5. After the titrator updates it's settings, press "OK" to save

Hat dir diese Antwort geholfen?

Wird gesendet...
Vielen Dank für Ihr Feedback.
Beim Senden ist ein Fehler aufgetreten. Versuchen Sie es erneut.