How do you connect a Sigma Rain Gauge to an FL900 and program it?

Dokument-ID

Dokument-ID TE8964

Veröffentlichungsdatum

Veröffentlichungsdatum 20.12.2021
Frage
How do you connect a Sigma Rain Gauge to an FL900 and program it?
Zusammenfassung
Connecting a Sigma Rain Gauge to an FL900 and programming it using FSData Desktop
Antwort
  1. There is a Port on the FL900 labeled “Rain.” Connect the Rain Gauge cable to this Port.
  2. Connect your computer to the FL900
  3. On the General Settings page, below “Select Channels to Log,” you will see “Rain” listed under the “Logger” section.
  4. If it is not visible, check the box to the left of “Logger” and it will appear.
  5. Check the box to the left of “Rain.”  Three fields will appear that will allow you to select the following:
Be sure to “Write to Logger” (button on lower right hand corner) so your changes will be written to the logger

Hat dir diese Antwort geholfen?

Wird gesendet...
Vielen Dank für Ihr Feedback.
Beim Senden ist ein Fehler aufgetreten. Versuchen Sie es erneut.